Porch swing plans and dimensions-23 Free DIY Porch Swing Plans & Ideas to Chill in Your Front Porch

I lived in 3 different houses growing up and 2 out of the 3 had a big front porch and a porch swing. So it should come as no surprise that I now have a big front porch and am hoping to soon have a beautiful porch swing hanging out on it. This swing is what many imagine when they think of a porch swing. It is painted a beautiful porcelain white. It also has the traditional design of a porch swing.

Porch swing plans and dimensions

Porch swing plans and dimensions

Porch swing plans and dimensions

Porch swing plans and dimensions

I plasn my FinishMax for painting projects but had really wanted to use it for staining something. DIY Summertime Porch. The arbor frame is easy to build, and you can screw short pieces on top of the beams to add character. Should I add another support or any other suggestions? June 28, at am. They write that it is a great weekend project though sealing and staining Porch swing plans and dimensions will add a couple days worth of work to ensure it is treated and protected against inclement outdoor elements.

Steel panty. Plans and Instructions

Log into your account. Step-by-step instructions Julia montgomary naked it easy to work it out. Porch swing Porch swing plans and dimensions center console plans Porch swing plans. Cedar is very powdery so Porch swing plans and dimensions sure to wear a respirator. It has the higher back so it looks like it would support your body pretty well. The Poech instructions provide plans for this weekend pine swing project. Lightly chamfer the hole to prevent fraying of the rope. By all means, if you end up constructing one of these porch swingslet us know in the comment section below. To build a porch swing, start by measuring the area where you want to install your swing to determine PPorch long you should cut your slats. The Cedar Ppans Bench Idea So why would this swing be any different?

If there's one thing summer is synonymous with, it's spending lots of time relaxing on your porch swing.

  • I lived in 3 different houses growing up and 2 out of the 3 had a big front porch and a porch swing.
  • This might seem like a big project, but it is actually very simple and doable even for a beginner.

This type of swing is one my favorite things to build for a couple of reasons. And two, they are extremely awesome for taking naps. One of my favorite parts of the process is coming up with new designs.

So before you get started, take a look at these plans for a different design to see if you would rather build that one. For this one, I wanted it to have very clean lines and I wanted it to be very easy to build, even for beginners.

I also wanted it to be affordable. Of course, that price can vary based on what wood you choose to use and where you get your wood. I tried to keep everything as simple as possible.

So all joints in this build are butt joints. And in case I forget to mention it anywhere in this tutorial, assume that everywhere there is a joint or two pieces of wood meet, apply some wood glue. You can find the measurements in the illustration. Then I added an inner frame for support and something to nail the bed slats to. This will be the support for the mattress. After all four posts were in place, I cut all of the rails.

These are the horizontal pieces that connect all of the posts. I attached all of the back rails first. Then the side rails. Refer to the illustration below for lengths and spacing. As I mentioned earlier, I really wanted to design this swing to be super simple to build with only straight cuts that could be done with the miter saw, but then I got to the arm rest pieces which required a little extra cutting.

Then I had to use a jig saw to cut out a notch for it to fit around the back post as you can see below. After I finished these cuts, I glued and nailed them in place as shown in the illustration. The final step in the building process was adding the top to the back and a middle rail support. I filled all holes with wood putty and to round off the corners a bit and get rid of any splinters I sanded the swing with fine sand paper.

I then applied a coat of stain and three coats of polyurethane. Once everything was dry. It was time to add the eye screws. The rope will run through these and hold up the swing. Then I drilled my hole for the eye screw and screwed it in. You just need to make sure that you are screwing into ceiling joists. For the mattress, any twin mattress should work, and you can get a burlap mattress cover from World Market.

Then you can finish it off with some pillows. I hope you found this tutorial useful, and if you have any questions, please leave a comment below.

Great job Henry! I love the way you explain,very easy to follow along. It turned out beautifully. Our porch for our new home is small and our deck is not cover. Thank you so much for sharing. Hi — this is beautiful! Have you done this or any recommendations? I know not the best planning. Should I add another support or any other suggestions?

Glad you like it. I have a rooftop deck so no roof over it to attach to. Do you think if I build a stand it could support a swing bed like this?

I guess I should have mentioned that in the article. I used Minwax Polyshades Mission Oak. Curious though, how many coats of stain did you cover it with for protection? Also, I want to thank you for taking the time to post the plans of this beautiful swing. I put one coat of stain on it, and then a couple of coats of polyurethane. The Minwax Polyshade in mission oak looks so much darker than the color of your swing.

Did you dilute the color before applying? Thank you, in advance! My husband made this swing for me in a short afternoon! I covered the mattress and made the pillows and that took much longer.

Now if the weather cooperate so that we could actually sit out there at night! Thanks for the plans and inspiration! Nice work — Thanks for sharing!

Hi there Rhonda. Check out the step right after the picture of me with the jigsaw. Hi Tammy. I think we got this one at BigLots. Hi Brenda. I screwed eye screws into the ceiling joists in the porch ceiling. Then ran a rope through them and through each eye screw on the bottom of the swing, and tied knots as you can see in the pictures.

Do you guys actually use it for sitting? We have a traditional porch swing and use it all the time. I love the look of these but wonder how they are for functionality. Hello Mike! Yes, we actually use the swing bed lots! We use it for sitting and taking naps on…lol. Henry made one for my mother and she the placement of it is perfect for swinging and the grandkids use it tons for that! Hi Lisa. We used a standard twin bed mattress, and the cover is from World Market.

You can find the link in the link in the second to last paragraph. Thanks for the plans they seem very straightforward and easy to follow! Thank you! Do you think it would be possible to use screws everywhere instead of nails? I already have a drill, but I do not have a finish nailer. Henry, Do you have a rough estimate for the final costs including the mattress? Great job! Thinking of trying to surprise the wife with it.

Hopefully comes out as good as you did. Hey Patrick. Do you have the measurements for a full instead of a twin? Does it ever get wet? Thanks and sorry for not replying sooner. Just now saw your comment. So you would just need add the additional width onto the pieces of wood on the side frame and rails. Our mattress has done very well, although it is completely shielded from the weather. The only time it gets wet is when wet kids coming out of the pool hop on it. Good luck with yours!

The swing is beautiful… can you please tell me what is the space between two eye screws in ceiling…? It seems close, I have two joist running 24 inches apart..

Would that work..? And also how far is this two screws from the other two..? Thanks for the nice easy plan. I had to place them like that to keep the rope away from the fans. It was poor planning on my part. We should have went with three fans.

If you have a table saw, you can use this for ripping the slats instead. You may find you need to adjust the chains to get the swing tilted back the proper amount to be comfortable for you. Insert the eye bolts for the chain. Use galvanized or coated fasteners to prevent corrosion. So that is definitely a perk of this design. However, I love that it still looks really manageable to build yourself, too. Yet, it also looks as though it would be right at home on the front porch of a tiny wood cabin that is neatly nestled away in the woods.

Porch swing plans and dimensions

Porch swing plans and dimensions

Porch swing plans and dimensions

Porch swing plans and dimensions

Porch swing plans and dimensions

Porch swing plans and dimensions. It’s that simple to build a porch swing!

The length of time it takes you to build this project depends on how skilled you are. We figure for someone with intermediate skills, this build should take around 6 or so hours. Without further ado, here we go with the cut list. With your deck boards prepped, follow these cuts for your DIY porch bed swing:.

Step 2: Assemble the Support Structure. Step 6: Cut and Install Ledger Strips. Search for:. Relaxing Times Ahead Pin this graphic to come back to the plans later.

Use the two lengths to make a beam: Spread a uniform layer of exterior grade wood glue along the entire length of the wood, then align the boards facing the grain patterns against itself. Clamp the length of the beam. Then use screws every six or seven inches to secure. If necessary, you can use a clamp along the width of the beam to align the edges.

Use clamps to hold the braces in place while you drill pilot holes and install screws through the beam. Distribute the braces evenly across the frame, about every foot or so. Lightly chamfer the hole to prevent fraying of the rope. You can also chamber the ends of the beam if you like. Lightly sand any rough edges. Measure and mark the center of both the support structure and each frame end.

Align these marks, and clamp the pieces together temporarily. Use a straight edge to mark the location of both sides of the beams, measure and mark the depth of the beams as well. Use a jig saw to cut along the lines, being careful not to cut away too much material at first.

Slide the frame ends over the teams and check for proper fit. File or sand away any obstructions. Once the frame fits snuggly in place, clamp and use screws to secure it to the support structure on both ends. To make a curve on the front board, measure down from the top edge an inch and a half. Use a bottle or something similar to mark the first curve centered on this mark. Then shift the pattern over and draw a second circle. Use a jigsaw to cut the pattern and then sand it smooth. Step 6: Cut and Install Ledger Strips Draw a reference line along the two ends of the frame, level with the support structure.

Transfer this mark to the front piece and draw a line the entire length. Glue and nail the ledger strip into place Install shorter ledger strips on the frame ends as well. Install short supports on the front of the frame. Measure the distance between the support structure and the front frame and use a pocket hole jig to attach the short braces. To make it easier to make the cuts, attach a scrap of food aligned with one of the marks.

Run the assembly through the table saw to cut the first edge, then remove the scrap of wood, and run the pattern through to cut the second line.

The website is a little scant on the actual wooden swing set plans, but it can serve as inspiration for building out your own porch bed swing. It has a unique steel pipe suspension system designed to decrease wood joint stress with its eyebolts fastened through steel pipe.

They caution that you should keep an eye on children playing on or near this cedar porch swing because the hard edges can deliver a painful bump.

The instructions provide a thorough tools list that includes an adjustable wrench, a block plane, bar clamps, hacksaw, a miter saw, a jigsaw, a table saw and an orbital sander.

Mother Earth News provides instruction plans for assembling a durable porch swing that can either be hung from your rafters or integrated into a support frame. The joints in this wooden bench swing are either screwed or glued together- they specifically advise using wood glue that is either Type II or Type III grade water resistance like Gorilla wood glue.

My Outdoor Plans provide instructions for creating a modern covered porch swing. This arbor-style swing has a trellised top that provides some protection from the scorching sun. The project plans include a materials list, required tools, and walk you through constructing the floor frame, fitting the decking, how to attach the posts, how to assemble its support beams, constructing the rafters, creating the braces and fitting all of the elements together to create a pergola style porch swing.

This park bench style wooden hanging porch swing is another attractive option provided by My Outdoor Plans. The instructions advise that you use either pine, redwood or cedar because of their attractive appearance and natural rot resistance. This handsome park bench style option will require several coats of stain and can be combined with a swing stand to make it freestanding as opposed to hanging it with chains or rope braid.

Another solid option is this a frame patio porch swing. The instructions guide you through building the A-frame, providing articulate measurements and directions so that you can hang a purchased or handbuilt wooden swing set from it. The detailed planning instructions show you how to build the swing frame, how to attach the cleats how to fit the trim, how to fit the bench supports, and how to attach everything together into a fully assembled wooden porch swing bench.

The website provides a comprehensive materials list that includes concrete blocks, measured lumber, galvanized wood screws, tarpaper, and asphalt shingles.

The next outdoor porch furniture plan is this garden deck cupholder option. It is unique because it has a center console so that two people can sit in it side-by-side and share a space to place their beverages.

Wikipedia also informs us that they are historically popular with nursing mothers who find that its movements are calming for newborns. You can place it on a patio, inside a gazebo or situate it within your enclosed porch to create a restful spot to read during the summer months or kick back and take a nap in the spring evening hours. As you can see it is suspended from a simple bracket shaped frame. Sincerely Marie Designs provides a fun pergola DIY porch swing plan supplemented with chic throw pillow cushioning.

Skil Tools provides instruction for this summer swing. You can paint it white, blue, yellow, any color, really, to make it better blend with the decor of your outdoor environment. The downloadable instructions provide plans for this weekend pine swing project. The instructions include how to cut out and prime the parts, creating the frame sandwiches, assembling the armrests and slats, and how to hang a porch swing using a swing hook kit.

They also take care to explain how to create your own hanging system that will support the weight of the people sitting on it. They write that it is a great weekend project though sealing and staining it will add a couple days worth of work to ensure it is treated and protected against inclement outdoor elements.

Once completed, they envision it as a restful place for couples to spend evening hours in quiet conversation, sharing an adult beverage and watching neighbors pass by in the summer evening hours.

The porch bench style resembles an Adirondack chair in its modern appearance and luxuriously elongated slants. Sawdust To Stitches provides an indoor option. The instructions walk you through the especially tricky part of mounting it into ceiling joists. This can be a good option if you want to upcycle materials like a spare crib mattress- or serve as inspiration if you need to recycle an old porch bench and convert it into something new.

The website provides a full shopping list that includes plywood measurements, brad nails, and hardware hooks as well as a suggested tools and materials list. The builder recommends that you use either redwood, pine, cedar or pressure-treated lumber along with galvanized screws to build it to last.

Simply Designing with Ashley Philip provides a porch swing tutorial that sits beneath a pergola and replaces a backless wooden bench that her family never used. The supplies are carefully described and include a full cut list for the frame boards, corner posts, seat boards, vertical back support, horizontal backboards, armrests, cross beams and trim.

One thing that made it easier was that they utilized a lot of the wood from the benches and upcycled it into the porch swing itself. To make it comfortable, they gave the boards a good sanding, sprayed it with a deck cleaner and used a FinishMax stain on it. They supplemented it with some outdoor cushioning and fun pillows to make it really cute- string lights also provide attractive illumination for summer evenings. The Sweet Melanie website provides inspiration and instruction for creating a cozy and highly decorative wicker-built porch area.

One of the fun aspects is the cord cozies that cover the swing chains. It hangs from a tree using a rope that attaches to chains bound with a bowline knot also employing a spring-loaded carabiner. In order to make the curved edges, you can trace around a paint can and then use your jigsaw to cut the curve. This porch swing employs a repurposed headboard which makes it especially wide and spacious for summertime relaxation.

The materials list includes sourcing an old headboard, as well as using a clear wood coat, paint, dog beds, throw pillows, rope, screws, and sandpaper. This attractive light blue option is fairly wide and can easily accommodate three people at a time. Because her family had some old antique headboards lying around the garage, it made sense to upcycle them and create a truly unique and artistic creation. They write how difficult it was to get it hanging from the chains exactly right.

This was because it weighed a ton and aligning the chains perfectly was a difficult procedure, even for two people. The paint color is Annie Sloan Duck Egg- the woodworker says it is a calming coloration that really comes to life with the decorative white tracing they did. The builder describes creating a comfy back support by breaking down the shipping pallets and using 2 coats of blue outdoor wood paint. They decided to use white nylon rope that they threaded through the boards as well as the top of the bench to make sure it was structurally sound.

For the cushioning, they repurposed some old patio cushions and then made one large slipcover out of a weather-resistant flamingo pattern fabric. If you need help choosing a cabinet table saw , check out the preceding link- they can be a great help when undertaking complicated woodworking projects.

By all means, if you end up constructing one of these porch swings , let us know in the comment section below. Sign in. Log into your account. Password recovery.

56 DIY Porch Swing Plans [Free Blueprints] - MyMyDIY | Inspiring DIY Projects

Occasionally a crazy idea hits me like we need to rip up part of our nice deck and build a swing! We have a beautiful deck that we spent a lot of time building and staining and re-staining! It has gorgeous landscaping thanks to my husband and the deck has pretty built-in benches too. So today it hit us to rip out one of the benches ie take apart half of the deck and build a porch swing instead!

So today, I am going to show you how to Build a Porch Swing. So today I am sharing my tutorial as well as my plans on how to build a porch swing! Yes, plans! I finally took the plunge and decided to start learning SketchUp! Because we already had a bench on our patio, the first thing we did was to remove the top of the bench. This was easily done by unscrewing the boards and carefully laying the wood off to the side.

Our bench legs were bolted into the deck support boards that ran under our deck top. So in order to remove the bench legs, we needed to remove several deck boards.

Once the bench was completely removed, we installed new deck boards. We ended up rearranging the boards so that all the new boards were next to each other. This is not necessary, but it was our personal preference.

You can use new boards instead. After that, we attached the 2 horizontal back support boards by screwing them into the vertical back support boards. I know I am missing one seat board in this photo…I was working late at night and ran out of boards, so I bought a new board the next day and installed it in place.

After the swing was assembled we sanded it down well. Because our boards were previously used, we sprayed it with deck cleaner and let it dry completely before proceeding. Next comes the fun part!! So a big huge thank you to HomeRight for helping to make this post possible! I love my FinishMax for painting projects but had really wanted to use it for staining something. And I finally got my chance! I simply filled my FinishMax with stain no need to thin stain and went to work staining my bench!

I am now addicted to using my FinishMax to stain things! We screwed the Eye Screws into the pilot holes. We needed to create a support system to hang our swing by. We were sure to tighten this well. Then we cut the rope into 2 equal pieces and tied a loop in the middle of each piece. We used the anchor shackles to connect the rope to the eye bolt. Now comes the final step! Simply run your rope through the eye screws in the bench and tie two knots to keep the bench in place.

We tied the rope so that the swing tilted back ever so slightly and so that it was at a comfortable height. We bought this Bench Cushion and these Outdoor Pillows. We really do love our swing! This is a favorite spot for my husband and I to go and sit on at night after the kids are in bed. We turn our Edison Patio Lighting on and sit and talk.

And if you notice, we now have a little walkway to the side of our patio too! Our children always climb through the bushes and on to the deck this way, so now they have a designated path. Plus we are hoping to one day put a lower patio space here. But until then, it will keep my bushes from being stepped on! Genius idea!! A big job you guys got yourself into but it looks rewarding! I really have to get myself a paint sprayer, makes for light work!! First off, your swing is absolutely beautiful!

I have a cedar sunroom and it is due to be stained this year…. Thanks for sharing your awesome idea and instructions. You did such a great job on the swing! The whole deck looks great too. I would paint my outdoor furniture. I would love to do some home projects using a HomeRight Sprayer! I am also interested in being a HomeRight Ambassador! We have a deck that is dire need of a new stain! I would love to have this sprayer so that we could get that done!

I would paint a dining set and china cabinet that my grandmother gave me. I love your swing. When we looked at our house to purchase there was a porch swing but when we went to move in it was gone. I was so sad. I know where it is because they moved nnot too far away same town and it hangs in a. Anyway…yours is beautiful. This is fantastic! A swing is on my to-do list for this summer so thank you! And thanks for linking to Monday Funday xo.

Be still, my heart! This bench would be my happy place! Thanks for linking it up to the party this week, Ashley! I love this! What a great porch swing. I have one we built a few years ago and it is my favorite place to relax. Thanks for sharing at Merry Monday! Your swing is awesome! So glad you shared with us at Merry Monday.

This turned out amazing! Seriously, love it. Thanks for linking up to the Creative Gallery link-up. I have always wanted to put a swing in my back yard, I have a pretty big back yard and we do have the space! I will save this post for reference and help, if i end of making one!

Thanks for sharing this on Dream Create and inspire we love it! Hope to see you at my blog, love your input. Hugs Maria. Your whole porch is so cute, especially the swing! Thanks for the tutorial! And your whole pergola is gorgeous! What are yours? Do you like them? Will see when I get there. I would love to have a porch swing! Thanks for such a great tutorial — pinning to share. I love the swing! The entire porch is so cute! How pleased are you with those outdoor pillows? Are they OK when the weather is hot?

Using side eye screws on both side of the joist. Eye bolts should not be used as you have them in the bottom of the swing, holding it up. Great job! Love that swing. My daughter is building a house with a wrap around porch, Im showing her this post! Love your new porch swing.

Porch swing plans and dimensions

Porch swing plans and dimensions

Porch swing plans and dimensions